Wanganui, Mcsorely 442E / MX5

For keeping us up dated on your building of a Clubbie/Seven replica

Moderators: Simjen, KiwiBirkin

Forum rules
User's Projects / Build Ups Forum Rules
This section of where you guys can show off the progress you make as your build comes together of your clubman, give details of any modification progress, share pictures etc. There are just a few rules that need to be followed for this forum to stay nice, clean and easy to use:

1. ONE thread per project please. You all have access to edit your own posts, so do that. You may post as many times as you feel like it within your allocated thread.
2. Only the person who owns the thread may post in it. Any others will be deleted. If you want to ask questions, comment or start a discussion, start a thread in the Project Discussion section or use the private message function.
3. You may not use your thread for anything else apart from showing off your car and it's build process, use the other forums for this.
4. Thread titles must be include your user name and a little about the project please.

Important : As this was a exsisting forum moved to its new home all exsisting build diarys will carry on as they are but by the new rules

Cheers Stephen
Wanganui7
Posts: 68
Joined: Sat Dec 21, 2013 11:22 pm
Location: Wanganui NZ

Re: Wanganui, Mcsorely 442E / MX5

Post by Wanganui7 » Sun Aug 11, 2019 12:50 pm

Had the option today of working on my car or going to Manfield to watch the Surgery Sprints. Weather looks very iffy so stayed home and fitted front guards.
Image

Wanganui7
Posts: 68
Joined: Sat Dec 21, 2013 11:22 pm
Location: Wanganui NZ

Re: Wanganui, Mcsorely 442E / MX5

Post by Wanganui7 » Sat Aug 31, 2019 3:08 pm

Got the bonnet, scuttle and some trim pieces back from the powder coaters on Friday and have been fitting to the car. The louvred vents are abs plastic ones off ebay. You can get them in actual carbon fibre for three times the cost.
Image

Image

Wanganui7
Posts: 68
Joined: Sat Dec 21, 2013 11:22 pm
Location: Wanganui NZ

Re: Wanganui, Mcsorely 442E / MX5

Post by Wanganui7 » Sun Sep 01, 2019 3:50 pm

Had a go today at bending the window frame using 19x19x2.5 channel. Cut a template using 16 mm custom wood , put through a thicknesser and reduced down to 14mm. Welded up handle with a couple of bearings as a roller. First annealed the bend area with a small propane torch, having a bigger torch would have made the job a lot easier. The first attempt was a disaster with the flanges buckling. Second attempt heated the alloy much more. Only bent 10mm at a time , moving a clamp behind the roller to stop buckling. A little tidying up with a hammer and sander should be good enough to powder coat black.
Image

Image

Wanganui7
Posts: 68
Joined: Sat Dec 21, 2013 11:22 pm
Location: Wanganui NZ

Re: Wanganui, Mcsorely 442E / MX5

Post by Wanganui7 » Sat Sep 14, 2019 6:48 pm

Took the car for a blat down the road last weekend. It appeared to be searching for fuel under hard acceleration, although the tank was 3/4 full. So I decided to move the pump to below the bottom of the tank. And the outlet from the top to the bottom left corner. Now the fuel fills the pump under gravity instead of having to suck.
Image

Image

Wanganui7
Posts: 68
Joined: Sat Dec 21, 2013 11:22 pm
Location: Wanganui NZ

Re: Wanganui, Mcsorely 442E / MX5

Post by Wanganui7 » Sat Sep 14, 2019 6:50 pm

Am waiting on some fuel fittings from Hong Kong. $4 instead of $26 each here.

Post Reply